RUS ENG

   
 
 
   
 

Products

Water drain funnel
Water drain funnel is intended for the taking aside atmospheric precipitation from the flat  roofs and holding of the specified water level cooling the foor in the summer time.
Technical characteristics:
Bowl diameter, mm - 360.
Height, mm - 570.
Mass, mm - 25,7
Material - Sch 10 GOST 1412-85.
Componentry:
Draining pipe -1 pcs., screw-nut  Ì12,5 GOST 5915-70 - 4 pcs., ring pinch -1 pcs., washer 12.02 GOST 1137-68 - 4 pcs., cowl -1 pcs.
Street hydrants, shells, muffs
Shells and safety muffs, street hydrants - products, that are widely used in the connection, energy branches, communal services. They are produced by the factory in a wide range of modifications and technical characteristics.
Dual door
It is intended for the installation in the fire-chambers of the heating ovens on the solid fuel. It has good-looking external part. It consists of frame, loading, blowing doors and  decoration reflectance of the loading door.
Overall  dimensions, mm:
Height - 450;
width  - 250;
thickness - 60;
mass, kg - 11.
Decorative fireplace doors
Decorative cast-iron doors intended for the frieplaces.
Decorative bench
Decorative cast-iron bench is construct element of the benches, intended for the installing in the places of the cultural resting. The drawing on the bench has aesthetic forms and gives the impression of the lightness and airness of the construction.
Overall  dimensions, mm:
Height, mm - 950;
Width, mm - 590.
Rain receiving hatch  
The hatch is intended for the  removal of the sewage from the earth surface , is installed on the roadway.  Is produced with the locks.
Overall  dimensions, mm:
Height, mm - 103
Length, mm - 1065
Width, mm - 550
Mass, kg - 161
Cable shaft and telefone sewerage system hatches
The hatched are intended for the installing on the observation cable shafts and telefone sewerage boxes.
The hatches are produced of 2 types:
T -  heavy hatch for installing on the roadway;
L – light hatch for installing on the pavement è foot-pathes.
Overall  dimensions:
Type of the hatch - T
diameter - 850
Height - 110
Mass, kg - 145

Type of the - L
diameter - 780
Height - 75
Mass,kg - 82,5

Trunk and upper cover materia l- Sch10 GOST 1412-85. The rest - st. 3 GOST 380-71.
Full integration: trunk, upper and lower covers. By the customer request the hatches can be made with the locks.

Decorative baluster

The balusters are the construct elements of the fences: banisters of the staircases, balconies, fences. The drawing has aesthetic forms and gives the impression of the lightness and airness of the construction.

Overall  dimensions:
Height, mm - 900;
width, mm - 250;
thickness, mm - 50;
mass, kg -14.

Decorative fences

The fences are intended for the fencing of the pavements, residentional houses, garden-plots, graves. The erection is by the way of  joining the sections by the columns,  that are concreted and serve as the carrier fence construction..

Overall dimensions:
  Section Column
Length, mm 1200 810
Width, mm 430 70
Thickness, mm 50 70
Mass, mm 35 8
Suburban houses oven.
The suburban houses oven on the solid fuel serves for the heating suburban houses, subsidiary temporary  lodgements and for cooking. It is distinguished by the simple construction and min. fuel consumption (firewood, coal, peat). The oven is made by the founding from the grey iron  and consists of:  trunk with the doors: cover with the  burners; fire-bar, tray.
Overall  dimensions:
exterior diametr, mm - 310;
Height, mm - 580;
mass, kg - 40.
Double- and singleburner ovens
Singleburner oven serves as the working surface of the kitchen oven.
The oven is supplied with the set of the burners.

Overall  dimensions, mm:
length - 620;
Width - 290;
Thickness - 15;
Mass, kg - 13,5.

Doubleburner oven serves for the installing on the brickwork kitchen ovens for cooking. The oven is supplied with the cast-iron oven with the set of the burners for 2 holes.

Overall  dimensions, mm:
Length, mm - 710;
Width, mm - 410;
Thickness, mm - 20;
Mass, kg - 24.
Lattices for 4- and 2 burner gas ovens
The lattices serve as the  support for the crockery placed on the gas oven for cooking. The lattices are founded of the grey iron.
Dimensions of the 2- burner lattice:
Length, mm - 470;
Width, mm - 220;
Heigth, mm - 20;
Mass, kg - 3,1.
Dimensions of the 4- burner lattice:
Length, mm - 460;
Width, mm - 460;
Heigth, mm - 40;
Mass, kg - 5,2.
Traps

The traps are intended for the receiving and  removal in the sewerage nonintrusive sewage from the floor surface.
Composed of: trunk, lattice, stopper.  The traps can be produced of the diameter  drain branch pipe Du 100 and Du 50.

Overall  dimensions:
TK-100 430õ300õ200 (n). Mass, kg - 18.
TK-50 310õ190õ130 (n). Mass, kg - 8.
Shaper-sewerage parts
Shaper-sewerage parts are intended for the inner sewerage systems of the buildings and used for the connection of the tubing parts.
Founding material – sch GOST 1412-85, technical requirements for the foundings acc. to  GOST 6942.0-80. T-joints, direct and oblique cross-pieces pipe-bens, half pipe-bends,  device pipe-bends-T-joints, cross-pieces 2-surfaced, muffs, branch-pipes Du50 and Du 100, syphon - inspections, inspections and etc.

Overall  dimensions:
TK -100 430õ300õ200 (n). Mass, kg - 18.
TK -50 310õ190õ130 (n). Mass, kg - 8.